Just got a pro comp 6" stage 1 lift and moto metal 951's with terra grappler 305/65/18s.

Since this is roughly a 13" wide tire, are the tires going to stick out a lot? Does anybody have pictures of this setup by any chance?

 

Do you mean 325/65/18? I'm pretty sure those Moto Metals stick out far regardless of what tire width you go with. Arent they -25 offset?

 

Yeah, I meant 305/65/18. They're -12 offset

 

My tires stick out about 1.5 inches from my lariat flares. I have 20x9 wheels with -12 offset. If your wheels are 10 inches wide you'll be another half inch further out.

 

What is the width and backspacing on the wheels?

 

Thanks for the replies...the width is 9" and the backspacing is 4.5".

 

A 9 inch wide wheel with 4.5 inches of BS will stick out 2.5 inches farther than the OEM wheels.

 

Search my screenname for threads w/pics,,think it's my introduction thread. I have 325/65/18's and I like how they stick out. However, it has lead to a chunk of something getting thrown onto my drivers side door chipping the paint in the process. Flares would probably help me, but I like how the truck looks w/out them.

 

alright, that sticks a little farther out than I had hoped, what's my best bet for an 18" wheel setup that's thin and doesn't stick out much?

 

IORf150 has37" Terra Grapplers with those rims on his truck. You can look at pic's in my albums when I had the Terra Grapplers on. My wheels are 22x11 with -25 offset. I don't find they stick out to bad. I like a wide stance.

 

A 9 inch wide wheel with 5 inches of bs would stick out 2 inches farther than the oem wheels and is pretty common. If you can find one with 5.5 or 6 inches of bs they would tuck in even farther.

 

Ok, I think I'm just going to bite the bullet and swap out wheels before I even get the truck lifted. Looking at these:

Moto Metal 951, +18mm offset, 5.71" BS
Moto Metal 951, +30mm offset, 6.18" BS

I really like the tucked in look, and would like to get the 6.18" BS if possible, but the wheel guy I talked to said that the offset might be too high for the lift kit? Any thoughts?

 

Could be. I'd go with the version with 5.71 inches of bs.