Question for Thumper, Allrsdup, PatShea, anyone with a Rize 8"
#1
Question for Thumper, Allrsdup, PatShea, anyone with a Rize 8"
Okay, I'm deferring to the experts, those of you that actually have these lifts on your truck & not the dopes @ every shop around here & their ballpark estimates...
Will 37x15.5x20's rub with the 8" Rize with the AAL??? (I'll have 20's with around 4.52" of BS'ing)
From everyones pics with the 37x13.5's, it looks like there should be clearance, but those are just pictures, I want some good info from the guys that drive these truck everyday!!
Thanks, & don't worry Thump, I won't be getting the 951's, I love your truck & all, but god forbid ProComp having a cardiac event if anyone else buys Moto's!!!
Thanks again guys!
Will 37x15.5x20's rub with the 8" Rize with the AAL??? (I'll have 20's with around 4.52" of BS'ing)
From everyones pics with the 37x13.5's, it looks like there should be clearance, but those are just pictures, I want some good info from the guys that drive these truck everyday!!
Thanks, & don't worry Thump, I won't be getting the 951's, I love your truck & all, but god forbid ProComp having a cardiac event if anyone else buys Moto's!!!
Thanks again guys!
Last edited by MartyG525; 12-05-2006 at 10:41 AM.
#2
I know some of the people you have mentioned have rubbing with their 37's mid turn hitting a bump on the inner fender.....Patshea has 38's
factory coils are probably soft....
so yeah, you'll have rub with 15.5's......maybe you can cut it down though with proper wheel selection
good luck and make sure to post pics....I love those claws and would like to see em in 37's....
factory coils are probably soft....
so yeah, you'll have rub with 15.5's......maybe you can cut it down though with proper wheel selection
good luck and make sure to post pics....I love those claws and would like to see em in 37's....
Last edited by hotstang46; 12-05-2006 at 01:25 PM.