Go Back   F150online Forums > Powertrain & Mechanical > V8 Engines
Sign in using an external account
Register Forgot Password?
Register Photos Vin Decoder FAQ Members Search Today's Posts Mark Forums Read Vendor DirectoryGarage

Welcome to F150Online Forums!
Welcome to F150Online.com.

You are currently viewing our forums as a guest, which gives you limited access to view most discussions and access our other features. By joining our community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join the F150Online Forums community today!





Reply
 
 
 
 
Thread Tools Search this Thread Display Modes
  #1  
Old 04-13-2002, 08:26 PM
Senior Member
Garage is empty, add now
 
Join Date: Mar 2002
Location: Ohio
Vehicle: 1991 Ford F150
Posts: 428
Send a message via AIM to f-150_91
Angry my truck is missing really really bad and it's pissin me the f@!? off

ok getting to the niddy griddy I have a 91 F-150 with the I-6 in it. It has a really awful miss only during light throttle and when you push on the gas slightly in Park. This has been going on for about 10K miles or so and it's not gotten more worse nor better. The catalytic converters went to hell, and that didn't affevt the miss. Here's what I have done and what a waste of time and money:
I have done a complete tune-up: plugs, wires, cap, rotor, fuel filter, air filter, breather filter, and adjusted ign, timing to specs. and replaced 02 sensor and reset the computer by leaving the Neg. battery cable unhooked for 30 sec.

This miss my truck has is really pissin me off really bad and I'm about ready to say the hell with it and set it on fire
PLEASE HELP ME!!!!!!!!!
Reply With Quote
  #2  
Old 04-13-2002, 10:44 PM
Senior Member
Garage is empty, add now
 
Join Date: Feb 2001
Location: Oxford, Mississippi
Posts: 100
BURN IT! I had to get rid of mine to get the head gasket to stop leaking.

My guess is you have something mechanical wrong.....maybe in the valve train that is causing what seems to be a miss. Have you tried un-hooking one plug wire at a time? Do that until removing one has no affect on how it is running....then thats the offending cylinder.

Good luck !
Reply With Quote
  #3  
Old 04-14-2002, 12:32 AM
Member
Garage is empty, add now
 
Join Date: Aug 2001
Posts: 44
check EGR valve, smog pump, any vacuum leaks, spark plugs and cables, distributor cap and rotor, trotle positioning sensor and idle valve if aplicable etc...hope these hints help. Or get a new truck and get into more problems like me.
Reply With Quote
  #4  
Old 04-14-2002, 01:09 AM
Senior Member
Garage is empty, add now
 
Join Date: Oct 2001
Location: MN
Vehicle: 1993 Chevrolet K1500
Posts: 221
Im not sure if the 300-6's used them but it could be the ignition control module, the throttle position sensor is also a likely possibility. Dont burn it...at least not yet.

Good luck and let us know how it turns out.
Reply With Quote
  #5  
Old 04-14-2002, 03:47 AM
Senior Member
Garage is empty, add now
 
Join Date: Jan 2002
Location: Valencia, California
Vehicle: 1996 Ford F150
Posts: 1,354
Try what I told this guy...Help! Help! Help! Oh Please Help!
I have a 96 4.9L and I had a vacumm leak and it did the same thing as you described.
Reply With Quote
  #6  
Old 04-14-2002, 12:07 PM
Senior Member
Garage is empty, add now
 
Join Date: Mar 2002
Location: Ohio
Vehicle: 1991 Ford F150
Posts: 428
Send a message via AIM to f-150_91
Ok I just checked out the engine for any leaks, nota, I tried disconnecting one plug wire at a time while running the engine, nota, I was thinking of taking it down to the dealer and have them change my oil and decarbon the entire out (I use Castrol Synthetic) I hope this works out . I do appreicate all your information on this, who knows maybe I just need a new truck!!! But I hate to see my baby go
Reply With Quote
  #7  
Old 04-15-2002, 01:38 PM
KT KT is offline
Member
Garage is empty, add now
 
Join Date: Jun 2000
Location: HOUSTON,TX
Posts: 80
You might try a compression check.
If nothing else it will let you know what
kind of shape your rings and valve train
are in. As suggested earlier i am surprised
you did not find anything pulling the plug
wires one at a time. Maybe fuel system
related.
Reply With Quote
  #8  
Old 04-15-2002, 02:59 PM
Junior Member
Garage is empty, add now
 
Join Date: Apr 2002
Vehicle: 2002 Ford F-150
Posts: 6
EGR again and again

This is an engine I am very familiar with. Disconnect and plug the hose for your EGR valve then take it for a drive. You may be surprised. I do not recommend that you leave it disconnected but I have it repaired now that you have the problem isolated. Let me know what happens.
Reply With Quote
  #9  
Old 04-16-2002, 08:46 AM
Senior Member
Garage is empty, add now
 
Join Date: May 2001
Location: Maryland
Vehicle: 1999 Ford F150
Posts: 1,080
Send a message via AIM to hcmq Send a message via Yahoo to hcmq
it is mostlikely the EGR system like they say above very common problem on early 90's engines and almost always overlooked!

and remeber it's not just the EGR vavle it's the whole system that needs to be checked and serviced.

also leave the neg bat cable off for more than 30sec that isn't enough time.

good luck-
Reply With Quote
Old 04-16-2002, 08:46 AM


 
 
 
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


All times are GMT -4. The time now is 05:39 PM.


 
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. FordŽ is a registered trademark of the Ford Motor Company
Contact Us Advertising Privacy Statement Terms of Service Jobs Forum Text Archives
Emails & Contact Details

Search Engine Friendly URLs by vBSEO 3.5.2