Misfire

Thread Tools
 
Search this Thread
 
  #1  
Old 12-06-2016, 08:01 PM
bigorangesob's Avatar
Junior Member
Thread Starter
Join Date: Dec 2016
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Misfire

Well I'm back again, ok 98 F150, 4.6, 138,000 miles, started misfiring this morning pretty bad CEL flashing, checked when I got to work showed misfire on 1, when I got home I checked all of them to make sure they hadn't worked their way loose,(had that problem with #8) all were tight, so I turn the CEL off and drove it same thing only worse, this time it was showing #1 and #8,change the wires a few months ago, any ideas on what is going on now? Thanks
 
  #2  
Old 12-07-2016, 02:19 PM
Rmasters3's Avatar
Junior Member
Join Date: Oct 2016
Location: Cincinnati area
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
I had a similar issue with another truck--an Isuzu Rodeo with a miss on #3. I changed the #3 plug and coil, but no help. Then replaced the #3 injector which required replacing the intake manifold gaskets. That fixed it. If you've got compression and ignition, it could be mixture. Maybe head gasket leak sucking coolant and causing misfire?
 
  #3  
Old 12-07-2016, 09:20 PM
Roadie's Avatar
Senior Member
Join Date: Jan 2002
Location: Wilmington,NC
Posts: 5,994
Received 220 Likes on 200 Posts
Put a couple of bottles of Gumout for high mileage engines in the gas.
 




All times are GMT -4. The time now is 05:07 PM.