No power missfire shaking 2010 f150 fx4
#1
11-06-2015, 02:23 PM
Join Date: Nov 2015
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
No power missfire shaking 2010 f150 fx4
I have a 2010 f150 FX4 5.4 v3 76112
I went on a trip to Florida from NJ
3 days into my vacation I turn the truck off nap for 45 mins, went to go to the store. It took a long time to start then when it did it shakes to it just turns itself off. only way to keep it run is if you give it a little gas.
I replaced the cam phasers, the cam senors and the vvt senors.
runs the same. NO CEL light. the whole time even after letting it run for 20 mins no pending codes or stored codes.
the truck ran fine i was getting 22 mpg.
i use motorcraft filters and 10w30 motorcraft blend.
I went on a trip to Florida from NJ
3 days into my vacation I turn the truck off nap for 45 mins, went to go to the store. It took a long time to start then when it did it shakes to it just turns itself off. only way to keep it run is if you give it a little gas.
I replaced the cam phasers, the cam senors and the vvt senors.
runs the same. NO CEL light. the whole time even after letting it run for 20 mins no pending codes or stored codes.
the truck ran fine i was getting 22 mpg.
i use motorcraft filters and 10w30 motorcraft blend.