valve cover bolt problem
#2
Yea, their what's holding your cam cover in place. You may have to clean the cover with a rag to see them. Look again real good,- around the outside of the cover.
#4
#5
I figured thats what you meant but I thought I'd let these guys have some fun first LOL.
The pin bolts are a N806356, (8MM hex) M6 x 1 x 73.76 pin stud.
The regular bolts are a, N806183 (8MM hex) M6 x 1 x 42.5 bolt.
Torque is 8-12 Nm. Also don't forget a dab of black RTV at the "T" joints just before cover installation.
Dealer, Auto salvage, or Auto parts may have them. Dealer for sure. Good luck
The pin bolts are a N806356, (8MM hex) M6 x 1 x 73.76 pin stud.
The regular bolts are a, N806183 (8MM hex) M6 x 1 x 42.5 bolt.
Torque is 8-12 Nm. Also don't forget a dab of black RTV at the "T" joints just before cover installation.
Dealer, Auto salvage, or Auto parts may have them. Dealer for sure. Good luck
Last edited by DYNOTECH; 08-12-2010 at 11:40 AM.
#6
Join Date: Nov 2006
Location: Memphis, TN 38135, USA, Earth
Posts: 5,495
Likes: 0
Received 7 Likes
on
7 Posts
I have a bag full of bolts & hardware left over from stripping my CV's original engine. There's probably a full set in there. If you can't find them locally, e-mail me thru my SMN profile or my profile here.