4.6L engine swap
#49
So I have an 02 Mustang GT with the 4.6L 2v, and a 99 Expedition XLT 4.6L Triton. Should I be able to pull the engine from my Mustang and drop it directly into the Expedition and go without any modifications, or will I have to make some changes? I'm relatively new to digging deep under the hood 😅😅
#50
So I have an 02 Mustang GT with the 4.6L 2v, and a 99 Expedition XLT 4.6L Triton. Should I be able to pull the engine from my Mustang and drop it directly into the Expedition and go without any modifications, or will I have to make some changes? I'm relatively new to digging deep under the hood 😅😅
99 4.6 is plug wires
02 is PI engine with COP
#51
#54
#57
I believe so. New flywheels are not expensive.
https://www.rockauto.com/en/catalog/...,flywheel,5348
This may be a good time to replace the clutch and associated parts while the engines are out. Pressure plate, disc, slave/throwout bearing, pilot bearing, and rear main seal.
https://www.rockauto.com/en/catalog/...,flywheel,5348
This may be a good time to replace the clutch and associated parts while the engines are out. Pressure plate, disc, slave/throwout bearing, pilot bearing, and rear main seal.
#59