Motorcraft pcv valve part #
#1
10-21-2013, 04:41 PM
Join Date: May 2013
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Motorcraft pcv valve part #
I recently ordered a new motorcraft pcv valve, because no parts stores around carry it for some reason. Well it came in today, and was part EV-233. The one I pulled from my truck says EV-98. They look the same except the whole at the bottom is bigger on the EV-233 one.
Can I use this one or what? Will it cause my any problems?
It's a 98, 4.6.
Can I use this one or what? Will it cause my any problems?
It's a 98, 4.6.
#2
10-21-2013, 05:20 PM
Senior Member
Join Date: Aug 2010
Location: Mesa, AZ
Posts: 453
Likes: 0
Received 0 Likes
on
0 Posts
Ya I just ran into the same thing with the pcv. Went to the dealer and had to order the whole tube and valve as one. The valve on the new tube was EV-98 but it looked like I needed an EV-233 so I ordered that separate. Went to take off the OEM valve and tube and what do you know the OEM valve on my Windsor was EV-98 as well. I am running the EV-233 and havent noticed a bit of difference. Been about 500 miles +-.
#3
10-21-2013, 05:45 PM
Join Date: May 2013
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
#4
10-21-2013, 06:05 PM
#5
10-21-2013, 08:07 PM
Join Date: May 2013
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
