Porting and polishing the TB
#1
#2
#3
Originally Posted by scottbigred
X2 on that
#7
Trending Topics
#8
#9
Originally Posted by Tumba
if jbrew do know about it.
i sure i just thought i had it
i sure i just thought i had it
LOL - Hey , I seen you posted that "Cleaning The TB" earlier Tumba
That's the closest most get to a Port and Polish ..
I just used a 3" wire wheel - Buffer and some Ruby Red to polish the TB. - Hoaned out the ports with small pipe cleaners.
If your talking about bumping the TB up to 75mm then porting the elbow. -
Neal, Faster150 and ONELOWF(spelling) has done it.. But no one posted a "how to" on the topic that I have seen..
Last edited by jbrew; 12-31-2007 at 02:50 AM.
#10
Originally Posted by jbrew
LOL - Hey , I seen you posted that "Cleaning The TB" earlier Tumba
That's the closest most get to a Port and Polish ..
I just used a 3" wire wheel - Buffer and some Ruby Red to polish the TB. - Hoaned out the ports with small pipe cleaners.
If your talking about bumping the TB up to 75mm then porting the elbow. -
Neal, Faster150 and ONLOWF(spelling) has done it.. But no one posted a "how to" on the topic that I have seen..
That's the closest most get to a Port and Polish ..
I just used a 3" wire wheel - Buffer and some Ruby Red to polish the TB. - Hoaned out the ports with small pipe cleaners.
If your talking about bumping the TB up to 75mm then porting the elbow. -
Neal, Faster150 and ONLOWF(spelling) has done it.. But no one posted a "how to" on the topic that I have seen..
#11
Originally Posted by twintips_17
Yeah.... I have seen neal's tb and elbow nad his tool list. Im guna do a write up on it and take pictures at the differnt stages in it. Hopefully i will get it done tomarrow. Then people wont be so lost.
Yea , do that . Since I polished mine and removed that anti-sludge crap Ford puts in the TB's, it hasn't accumulated dirt or any kind of deposits around the plate. I just tweaked the TPS to .99 from 1.20 and feels a little quicker under normal acceleration - it gets right to 55mph with less effort and the trans shifts are spread a little further from 2nd -3rd. I would suggest this mod to dial it in even better ..Actually it's not a mod , it's suppose to be @ .99 from what I gather- BUT !! Check it out , their not ..
#12
Originally Posted by jbrew
Yea , do that . Since I polished mine and removed that anti-sludge crap Ford puts in the TB's, it hasn't accumulated dirt or any kind of deposits around the plate. I just tweaked the TPS to .99 from 1.20 and feels a little quicker under normal acceleration - it gets right to 55mph with less effort and the trans shifts are spread a little further from 2nd -3rd. I would suggest this mod to dial it in even better ..Actually it's not a mod , it's suppose to be @ .99 from what I gather- BUT !! Check it out , their not ..
#13
#14
Originally Posted by Tumba
i'm interested in the tps thread also.
at this point the kids have taken all the fords from me.
i'm haven to drive a cruiser again.
i feel the need for clown makeup when i'm in that thang
at this point the kids have taken all the fords from me.
i'm haven to drive a cruiser again.
i feel the need for clown makeup when i'm in that thang
I did the TPS threw an Analog meter - but it was acurrate, I checked it with two others to make sure.
Clown Makeup? Maybe a full face mask ehh
#15