Misfire at cylinder #2 code

Thread Tools
 
Search this Thread
 
  #1  
Old 12-04-2006, 01:30 PM
RoySomebody's Avatar
Junior Member
Thread Starter
Join Date: Dec 2006
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
Misfire at cylinder #2 code

Can anyone advise me as to where to go from here? Had the code pulled at Auto Zone and not sure where to begin. Any advise is greatly appreciated. 2000 Ford F150 4.6L
 

Last edited by RoySomebody; 12-04-2006 at 03:45 PM.
  #2  
Old 12-04-2006, 03:49 PM
jbrew's Avatar
Technical Article Contributor

Join Date: Oct 2005
Location: MI
Posts: 25,637
Likes: 0
Received 15 Likes on 15 Posts
Roy , you have COP's right ? Doesn't the 2000 4.6 have COP's? I think you do . #2 's bad . 2nd cylinder back passenger side , this one's easy to get to . Pull the coil and the plug - check out the condition of the plug, just look for the obviouse . Most likley you'll need a new COP.
 

Last edited by jbrew; 12-04-2006 at 04:04 PM.
  #3  
Old 12-04-2006, 04:22 PM
RoySomebody's Avatar
Junior Member
Thread Starter
Join Date: Dec 2006
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
Thanks again JBrew! Yes, I do have COP's. Does that stand for coil over plug? Are you thinking that the plug may be bad, or the coil itself?
 
  #4  
Old 12-04-2006, 04:49 PM
jbrew's Avatar
Technical Article Contributor

Join Date: Oct 2005
Location: MI
Posts: 25,637
Likes: 0
Received 15 Likes on 15 Posts
It's a possibility. Could be an injector as well. I would pull the plug first and check it out. If it didn't look bad I would ground it to the motor and fire it up to check for a visual spark . Uplug your injector for #2 before preforming this test.
 



Quick Reply: Misfire at cylinder #2 code



All times are GMT -4. The time now is 05:45 AM.