little help anyone? Cylinder 3 misfire

Thread Tools
 
Search this Thread
 
  #1  
Old 11-10-2012, 10:49 AM
2nahalfbikes's Avatar
Junior Member
Thread Starter
Join Date: Nov 2012
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
little help anyone? Cylinder 3 misfire

ok so i have a 1997 ford f150 with the 4.2l v6 engine, truck has 155,000 miles on it, just recently purchased the vehicle and randomly(so it would seem) on a warm start-up i will get a p0303 Cylinder 3 misfire code and the truck will have a miss.

i replaced the plugs and the wires but im still having the issue even though on the whole the truck feels better.

anyone have any ideas on this issue?
 
  #2  
Old 11-10-2012, 11:40 AM
prime81's Avatar
Senior Member
Join Date: Sep 2012
Posts: 470
Likes: 0
Received 0 Likes on 0 Posts
Could be any number of things with that mileage. Check your compression with high mileage. Not sure if the 4.2l has coils on the plugs, coils tend to go out periodically.
 
  #3  
Old 11-10-2012, 12:11 PM
2nahalfbikes's Avatar
Junior Member
Thread Starter
Join Date: Nov 2012
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
thanks 4 the input. but it run like a swiss watch when this is not happening.and 4 the record it has the 1 coil pack on top of the motor. thanks again.
 
  #4  
Old 11-11-2012, 12:10 PM
glc's Avatar
glc
glc is offline
Senior Member
Join Date: Dec 2006
Location: Joplin MO
Posts: 43,198
Received 761 Likes on 704 Posts
Replace the coil pack. I had the same issue a few years ago.
 
  #5  
Old 11-12-2012, 01:30 AM
97XL's Avatar
Senior Member
Join Date: Jul 2007
Location: London, ON Canada
Posts: 946
Likes: 0
Received 0 Likes on 0 Posts
x2 on the coil pack, just remember that the 5 & 6 wire are not sequential on the coil pack.
 



Quick Reply: little help anyone? Cylinder 3 misfire



All times are GMT -4. The time now is 04:31 PM.