2002 Ford Harley F150 Built with 3.4 whipple
#1
2002 Ford Harley F150 Built with 3.4 whipple
2002 Ford F150 Harley Davidson
50K on the Truck
Truck was built last year. About 3-4k on the build.
All parts where purchased new for the build except the trans and converter.
Interior is in excellent condition 9/10, some wear on the door panels. Nothing major.
Exterior is also in excellent condition 9/10. Paint still shines like new.
Truck still has A/C.
Truck puts down 615hp & 700ftlbs at the wheels, with 93 octane. Pulleys can be swapped out to run it at a lower hp level.
More pictures will be available this weekend.
Engine:
-3.4 Whipple Tuner Kit
-Accufab single blade throttle body
-Mahle H beam rods
-Mahle coated pistons
-forged steel crank
-custom grind comp cams
-Comp valve springs
-adjustable cam gears with arp bolts
-ported and polished heads to match blower with 5 angle valve job
-Felpro MLS head gaskets
-Arp head studs
-King race bearings
-Billet 100mm pulleys and Metco bracket
-Quick change lower pulleys 6lb & 8lb
Fuel System:
-aeromotive fuel rails and regulator
-Ford Racing 80 psi injectors
-2 Walbro 255 fuel pumps
-Fore thriple fuel hat
-all braided fuel lines and a/n fittings
Trans:
-f350 transmission cooler
-pi stall convertor 2400-2600
-level 10 transmission old style
Electronics:
-Mafia maf extender
-sct tuner with 3 tunes
-autometer 3 guage pillar pod with carbon fiber trans,boost,fuel pressure
-Innovative wideband
Exhaust:
-Pacesetter long tube headers
-3" all the way back
-No cats
Suspension, and misc...
-new upper control arms and lower ball joints
-new front calipers,lines, and rotors
-eibach 2/4 drop springs and shackles
-custom rear console that holds 4 10" subs(Not installed)
-third rear seat installed
-smoked headlights,taillights and 3rd brake light
-Factory tonneau cover
-Power slider rear window
-Bedliner
Asking 23,000 or best offer.
Located in Mass.
Extras parts not included but can be negotiated.
-set of 4 15" Bogart Drag-on Star wheels with front runners, no tires on rear (used)
-efan with mad controller (used)
-afco heat exchanger (used)
-JJ Monster inlet kit. (New)
-jlp long bars (used)
Book value of the truck in its condition is 16,000-17,000. About 15k has been spent on upgrades, have receipts.
Please no low ball offers, I dont need to sell, I have two other ford lightning trucks and need to make some room.
Email me with any question svt1999f150 at gmail.com
50K on the Truck
Truck was built last year. About 3-4k on the build.
All parts where purchased new for the build except the trans and converter.
Interior is in excellent condition 9/10, some wear on the door panels. Nothing major.
Exterior is also in excellent condition 9/10. Paint still shines like new.
Truck still has A/C.
Truck puts down 615hp & 700ftlbs at the wheels, with 93 octane. Pulleys can be swapped out to run it at a lower hp level.
More pictures will be available this weekend.
Engine:
-3.4 Whipple Tuner Kit
-Accufab single blade throttle body
-Mahle H beam rods
-Mahle coated pistons
-forged steel crank
-custom grind comp cams
-Comp valve springs
-adjustable cam gears with arp bolts
-ported and polished heads to match blower with 5 angle valve job
-Felpro MLS head gaskets
-Arp head studs
-King race bearings
-Billet 100mm pulleys and Metco bracket
-Quick change lower pulleys 6lb & 8lb
Fuel System:
-aeromotive fuel rails and regulator
-Ford Racing 80 psi injectors
-2 Walbro 255 fuel pumps
-Fore thriple fuel hat
-all braided fuel lines and a/n fittings
Trans:
-f350 transmission cooler
-pi stall convertor 2400-2600
-level 10 transmission old style
Electronics:
-Mafia maf extender
-sct tuner with 3 tunes
-autometer 3 guage pillar pod with carbon fiber trans,boost,fuel pressure
-Innovative wideband
Exhaust:
-Pacesetter long tube headers
-3" all the way back
-No cats
Suspension, and misc...
-new upper control arms and lower ball joints
-new front calipers,lines, and rotors
-eibach 2/4 drop springs and shackles
-custom rear console that holds 4 10" subs(Not installed)
-third rear seat installed
-smoked headlights,taillights and 3rd brake light
-Factory tonneau cover
-Power slider rear window
-Bedliner
Asking 23,000 or best offer.
Located in Mass.
Extras parts not included but can be negotiated.
-set of 4 15" Bogart Drag-on Star wheels with front runners, no tires on rear (used)
-efan with mad controller (used)
-afco heat exchanger (used)
-JJ Monster inlet kit. (New)
-jlp long bars (used)
Book value of the truck in its condition is 16,000-17,000. About 15k has been spent on upgrades, have receipts.
Please no low ball offers, I dont need to sell, I have two other ford lightning trucks and need to make some room.
Email me with any question svt1999f150 at gmail.com
#3
trade for 96 cobra?
Mod list
Black KB 2.2
Complete 03-04 eaton swap (minus the actual eaton)
Snow water/meth injection
Rebuilt original Teskid sent to MMR for the 900hp package bored .020
MMR 900:
Manley Forged 18cc pistons 9.5:1 compression
MMR 4340 Forged Rods
Clevite Tri-Metal Rod & Main Bearings
MMR/Felpro Extreme duty head gaskets
MMR Stainless valve kit
MMR Racing/Street oil pump
Complete ARP bolt kit
Stock 4340 Cobra balanced crank
Total Seal File Fit Rings fit for blower
Metco 3lb lower pulley kit
Upgraded idlers with additional snub idler
C head conversion
COP conversion
03-04 fuel tank
Fore walbro triple fuel hat (all wiring to supply power also)
Fore Fuel Rails
80lb fuel injectors
-6 fragile lines from fuel hat to
Fore 3 to 1 y block
-10 fragile fuel line to front of car with an aeromotive fuel filter in line
aeromotive 1 to 2 y block
-8 fragile fuel lines to rails then to regulator the back to the fuel tank.
Diablo sport MAFIA
Comp Stage 2 blower cams
FRPP aluminum flywheel
Spec Stage 2+ clutch
BBK ceramic LTs
BBK catted X
Accufab 550+ polished TB
JLT for high boost applications
"The Source" built T-45 with Billet 1-2/3-4 forks and the best he could get for a T-45
Moser 31 spline axles
03/04 Cobra diff
FRPP 3.55 gears
Steeda adj UCAs
HPM LCAs
Tokico 5-ways in the Rear/ KYB AGX in the front
Drilled/slotted rotors
UPR c/c plates
H&R Sport springs
Hooker catback
Pro 5.0
FR500's (deep dishes in the rear and fender is rolled)
Cobra R hood to clear the KB 2.2
I probably missed something but if i think of anything ill add it later to the list.
Ive got a clean and clear title in my name. Im looking for more of a trade than to sell it since i still want to have some sort of a toy. If i had to put my value on an asking price it would be around 13k to 15k. Don't bother telling me the car is worth only have that on Kelley blue book... I DONT CARE. There is a TON of money in this car and i have a binder full of receipts and documentation from the very first day this car was purchased back in 1996.
Please don't ask me if i want to trade you for your honda civic... its not happening. No motorcycles either. Im looking to get into a F250 4x4 6.0 diesel.
Mod list
Black KB 2.2
Complete 03-04 eaton swap (minus the actual eaton)
Snow water/meth injection
Rebuilt original Teskid sent to MMR for the 900hp package bored .020
MMR 900:
Manley Forged 18cc pistons 9.5:1 compression
MMR 4340 Forged Rods
Clevite Tri-Metal Rod & Main Bearings
MMR/Felpro Extreme duty head gaskets
MMR Stainless valve kit
MMR Racing/Street oil pump
Complete ARP bolt kit
Stock 4340 Cobra balanced crank
Total Seal File Fit Rings fit for blower
Metco 3lb lower pulley kit
Upgraded idlers with additional snub idler
C head conversion
COP conversion
03-04 fuel tank
Fore walbro triple fuel hat (all wiring to supply power also)
Fore Fuel Rails
80lb fuel injectors
-6 fragile lines from fuel hat to
Fore 3 to 1 y block
-10 fragile fuel line to front of car with an aeromotive fuel filter in line
aeromotive 1 to 2 y block
-8 fragile fuel lines to rails then to regulator the back to the fuel tank.
Diablo sport MAFIA
Comp Stage 2 blower cams
FRPP aluminum flywheel
Spec Stage 2+ clutch
BBK ceramic LTs
BBK catted X
Accufab 550+ polished TB
JLT for high boost applications
"The Source" built T-45 with Billet 1-2/3-4 forks and the best he could get for a T-45
Moser 31 spline axles
03/04 Cobra diff
FRPP 3.55 gears
Steeda adj UCAs
HPM LCAs
Tokico 5-ways in the Rear/ KYB AGX in the front
Drilled/slotted rotors
UPR c/c plates
H&R Sport springs
Hooker catback
Pro 5.0
FR500's (deep dishes in the rear and fender is rolled)
Cobra R hood to clear the KB 2.2
I probably missed something but if i think of anything ill add it later to the list.
Ive got a clean and clear title in my name. Im looking for more of a trade than to sell it since i still want to have some sort of a toy. If i had to put my value on an asking price it would be around 13k to 15k. Don't bother telling me the car is worth only have that on Kelley blue book... I DONT CARE. There is a TON of money in this car and i have a binder full of receipts and documentation from the very first day this car was purchased back in 1996.
Please don't ask me if i want to trade you for your honda civic... its not happening. No motorcycles either. Im looking to get into a F250 4x4 6.0 diesel.
#4
Trade
I have a 2002 Harley built by Troyer Performance looking to trade I have well over $47,000 invested knowing I will never recoup It interested contact me at bskittell@gmail.com