od Light

Thread Tools
 
Search this Thread
 
  #1  
Old 02-18-2006, 06:43 PM
brewmister2002's Avatar
Member
Thread Starter
Join Date: Feb 2006
Posts: 17
Likes: 0
Received 0 Likes on 0 Posts
od Light

I Have a 1995 F-150 5.8L 4x4 XLT When truck is parked and running if i push the button for od off the light comes on but when i drop it down a gear it goes out. But if when driving if i add upward pressure to the shifter the light comes back on i let go the light goes out? Any help on this? I dont think overdrive is off when this occurs just bought truck few days ago.Thanks
 
  #2  
Old 02-18-2006, 08:15 PM
adrianspeeder's Avatar
Senior Member
Join Date: Dec 2004
Location: Dover AFB DE / Harrisburg PA
Posts: 4,970
Received 17 Likes on 16 Posts
Originally Posted by brewmister2002
I Have a 1995 F-150 5.8L 4x4 XLT When truck is parked and running if i push the button for od off the light comes on but when i drop it down a gear it goes out. But if when driving if i add upward pressure to the shifter the light comes back on i let go the light goes out? Any help on this? I dont think overdrive is off when this occurs just bought truck few days ago.Thanks
Howdy and welcome!

It is common for the wire that comes out of the shifter tube to break or short out in the column. Take off the cover underneith and check it out. Might just be able to add some tape if the wire is still good.

Oh and 351 = sweet!

Adrianspeeder
 
  #3  
Old 04-06-2009, 02:26 PM
ta2dfireman's Avatar
Junior Member
Join Date: Jan 2009
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
my wire is broke right at the base of the shifter. how do you get the shifter loose from the column to get to the wires?
 
  #4  
Old 04-07-2009, 02:43 PM
Mark Kovalsky's Avatar
Senior Member
Join Date: Mar 2000
Location: SE Florida, USA
Posts: 1,740
Received 22 Likes on 19 Posts
There are three screws on the underside of the steering column. Remove them and take the plastic cover off. The wires usually break where they enter the shifter handle.
 
  #5  
Old 04-13-2009, 07:40 PM
ta2dfireman's Avatar
Junior Member
Join Date: Jan 2009
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
i took the plastic off the column. but still need the shifter took loose to get to wires. there is zero slack in the wires. i need the wires out of the shifter handle
 



Quick Reply: od Light



All times are GMT -4. The time now is 01:50 PM.