89 F-150 4x4 with 302 and 5 speed tranny

[charic09]

Hey all just wondering if anyone here knows how to remove the plastic tranny line that goes into the bell housing on an 89 F-150 4x4 with a 5 speed tranny? It runs through the firewall and right into the bell housing. Any thoughts?

Register today or sign-in to remove these ads!

[subs1000w]

its a pain in the butt depending on what your doing i usually unbolt the master cylinder from the firewall which i a ton easier but i was able to get it off at the trans with a fuel line removal tool

[Steve83]

It's easy. Just press the tiny ring around the line at the slave cylinder, and pull the line out.