transmission rebuild!
#1
#2
#3
Originally Posted by keith97xlt
you are braver then me. fluid and filter. adjudsting linkage,output shaft seal.thats all im willing to do. i dont have enough ***** to attempt a complete rebulid. those pics will be imformative.
You really want a total rebuild with great pictures - I got it on file - super great photo's of the process. I needed them when taking mine apart. I haven't orginized in awhile so I'll have to look for it - I will if you really want it . It's from a diesel websight of all thing , but they did a rebuild like this one.
Heres a pick from it -It's an E4OD build if that's what your looking for to many picks to list , you can find it and alot more good stuff at that website, like lifts etc..
Last edited by jbrew; 12-13-2006 at 07:14 AM.
#5
#6
Originally Posted by jbrew
Yeah, good deal, I didn't go to far at all on mine or I would have f'ed it up royally lol - Leave to the guys that do it all the time , Is that a 4R70w , can they build it strong enough? Like the monster inher box
haha yeh it is being built strong enough.. almost to the spec of a monster box. with koleen plates and red eagle clutches the rebuild kit is good for a claimed 600hp
#7
Trending Topics
#8
#11
Originally Posted by Faster150
me n dad got it removed last night its kinda fell out cause the jack stand was to tall. but nothing broke or was chipped or dented.
im getting it rebuilt today will post new pics as i get them taken!
im getting it rebuilt today will post new pics as i get them taken!
I can't get over how small that looks compared to my E40D 4X4..I have to make me a tranny jack kinda like that - have 2 three ton and one 2 ton Floor jacks and 10 1 1/2 ton tight quarters - porta powers. My fingers are still purple from the last little slippage mishap ^^@ #%^#$^ @^^&^!!!!! So , yeahh
#12
Originally Posted by jbrew
I can't get over how small that looks compared to my E40D 4X4..I have to make me a tranny jack kinda like that - have 2 three ton and one 2 ton Floor jacks and 10 1 1/2 ton tight quarters - porta powers. My fingers are still purple from the last little slippage mishap ^^@ #%^#$^ @^^&^!!!!! So , yeahh
yeh i know lol these trannys are small
#13
#14
ehh bad news.. the reason i was having these problems was because my 3rd gear lip seal blew out and 3rd was not getting any fluid and was over heating vibrating and eating away at the case, i told my builder just put it back together ill probably be buying a new one in a year anyways. but hopefully it will likely last another 60,000 miles.
#15
Originally Posted by Faster150
ehh bad news.. the reason i was having these problems was because my 3rd gear lip seal blew out and 3rd was not getting any fluid and was over heating vibrating and eating away at the case, i told my builder just put it back together ill probably be buying a new one in a year anyways. but hopefully it will likely last another 60,000 miles.
Sucks nursing a trans- I still don't know whats up with mine - Forwad clutch and spun the stator or converter shutter, Amsoiled , a little 140/90 and dr tranny . It still heats up enough to shudder at take off very little tho. I found a used one in the next town for $800 , but idunno - hard decision to make.
Good Luck with it , hope you make it - It's not your daily driver though , I doubt you'll go the 60 before you do something with it.