Lifts Fabtech vs RCD

Thread Tools
 
Search this Thread
 
  #1  
Old 10-30-2002, 08:43 PM
sdf150guy's Avatar
Senior Member
Thread Starter
Join Date: Sep 2002
Location: San Diego
Posts: 584
Likes: 0
Received 0 Likes on 0 Posts
Lifts Fabtech vs RCD

I want a lift for my 2wd F150, looking to put it up about 3" and put some 33's on it or maybe a little more and some 35's. I was origionally looking at the spindle lifts with blocks in the back, but after reading the posts, I dont want my tires to go out at all in the front. So i was looking at the 3.5" performace but I dont know, my question is what kit should i get??? I want it to go up 3.5" and run 33's but I want it to be even like not the front higher than the rear, even while driving. Also it is pretty much for looks, I wont be off roading THAT much but just when I go out to the desert with the dirtbikes or around some of the dirt launch ramps with the boat. I was told that gears would be reccomended, right now I have 3.55 w/LS and do I need to go to 4.10's??? What about a CST 3" lift?? It is here http://www.performancelifts.com/cgi-...t/CST0025.html
Thanks!!!!
Garrett
 

Last edited by sdf150guy; 10-30-2002 at 08:56 PM.
  #2  
Old 10-31-2002, 07:00 AM
Scott D's Avatar
Senior Member
Join Date: Mar 2000
Location: NC
Posts: 171
Likes: 0
Received 0 Likes on 0 Posts
I just put 33's (32.7" to be exact) tires on with 3.55 gears. I have a 5spd and 1st gear still pulls strong and overall gear range is fine. I don't think I'd go over 33" with the 5spd/3.55/V6 combination though. Can't say how the automatic would behave.

,,,,,,,,,,,,,,,,,,,,,,,,Scott
 



Quick Reply: Lifts Fabtech vs RCD



All times are GMT -4. The time now is 03:23 AM.