1986 F150 suspension swap?
#1
1986 F150 suspension swap?
I have an 86 f150 4x4 and she is my baby I love this truck. But I have run into an issue I have been way over loading her a lot recently and I am sure I could probably use a bigger truck but I want to keep her. So here is my question how would I go about putting 3/4 ton suspension under my half ton truck? my roommate is a welder by profession so any modification that I would need is not a big deal. If someone can give me any information other than sell it and get an F250 I would really appreciate it. She has 490000 miles on her and I plan on keeping her on the road for another 510000 at least.
#3
#4
I am well aware that it would not make my truck a 3/4 ton and I was hoping to transfer axles and all. Also the truck has a fresh engine and transmission rebuild. I was just thinking more or less stiffer suspension and I would like the bigger axles. 3/4 axles and suspension. I have just been loading this thing almost every weekend and it has not had a problem pulling or stopping just been sitting on the stops. worst case I will just do a strait axle swap with danna 60s and some 3/4 ton springs.
#5