If anyone has a 2WD SCrew that has been leveled only, no lift, and is sitting on 285-305/70/17's I'd love to see some pictures. As you can no doubt guess, this is the set-up I am thinking of and would like to get a preview. Thanx

 

I have 285/65/18's which is about the same size as the 285/70/17's. You can check my gallery for more pics. I don't think you'll be able to fit the 305's.

 

I agree. I'd stick with 285's.

 

 

you can also check my gallory. i have a 06 xlt screw that is 4x4 but i installed a 2.5 level kit from Hell Bent Steel(69 bucks with free shipping) then added a set of mickey thompson 305/65R17 on a set of pro-comp 1089 polished rims. kit was an easy install. took bout 45 minutes to do both sides. then had to get alignment to set back to factory specs. i have no rubbing issues with these tires as i have tried to get them to rub and cant seem to get it done.check it out and would recomend hbs spacers to anyone.hope this helps

 

I also have a Hell Bent Steel, 2.5" kit, and 275/60/20's and no rubbing, I will be going bigger with the next set. Pics are in my gallery

 

I have 285/65R18's with Nitto TG's and a 2" AS leveling kit.