Hello everyone I have an 89 F150 already with a DJM 3"/5" lowering kit, and I was wanting to know if anyone had any information on how I could possibly go lower without needing to bag it. I was thinking of doing the 2in drop coils for the front but a Tech at StylinTrucks told me I would run into camber problems. Is there a way to fix the camber if I put the 2in drop coils on or is the 3/5 kit as low as I can go? Any help would be appreciated Im only 19 and gettin more into the street scence since I dont compete in sound comps anymore.

Heres a pic of my truck before the lowering kit

 

i think you can get new i-beams from summitracing.com DJM makes dream-beams, they're a 3 inch drop, i think you can do a flip-kit in the rear and get a decent amount of drop, not sure how much, though.

 

Apparently you didnt read what was already posted^^?? I already have DJM 3in. dream beams in front and a 5in rear flip kit... Anyone have any info or what?

 

well if u have the 3in drop beams and a 5in flip kit then the only other thing u can do is get drop coils which is either 1 r 2 in drop then get a mini nothch and either blocks or shackles