New pics of shim kit and harley tails
#1
06-14-2008, 12:40 AM
Join Date: Jun 2007
Posts: 775
Likes: 0
Received 0 Likes
on
0 Posts
#6
06-14-2008, 03:58 AM
Join Date: Jun 2007
Posts: 775
Likes: 0
Received 0 Likes
on
0 Posts
#7
06-14-2008, 09:41 AM
Trending Topics
#8
06-14-2008, 09:48 AM
Senior Member
#10
06-15-2008, 01:31 PM
Join Date: Jun 2007
Posts: 775
Likes: 0
Received 0 Likes
on
0 Posts
#12
06-15-2008, 02:04 PM
Join Date: Jun 2007
Posts: 775
Likes: 0
Received 0 Likes
on
0 Posts
Pro Comp has 8 shims that are a 1/4 inch thick in there kit, you install them on top of your rear blocks. You can put in all 8 (4 per side) or less depending on how much height need. I put in all 8 and it's sits dead level. Measurements from the ground to the wheel well are 45 inches front and rear
#13
06-15-2008, 02:10 PM
Pro Comp has 8 shims that are a 1/4 inch thick in there kit, you install them on top of your rear blocks. You can put in all 8 (4 per side) or less depending on how much height need. I put in all 8 and it's sits dead level. Measurements from the ground to the wheel well are 45 inches front and rear
#14
06-15-2008, 10:12 PM
Pro Comp has 8 shims that are a 1/4 inch thick in there kit, you install them on top of your rear blocks. You can put in all 8 (4 per side) or less depending on how much height need. I put in all 8 and it's sits dead level. Measurements from the ground to the wheel well are 45 inches front and rear
#15
06-15-2008, 10:19 PM
Senior Member
Join Date: Oct 2006
Location: Arkansas
Posts: 1,186
Likes: 0
Received 0 Likes
on
0 Posts