Whining Noise from '02 Supercrew
#1
Whining Noise from '02 Supercrew
I have a 2002 Supercrew with about 57,000 miles on it. Recently, I have been hearing a high pitched whine come from somewhere underneath the truck. When it first started, it would only happen infrequently, and the whine would only last a few seconds. Today, it started out almost as soon as I got going, and would come and go, this time lasting up to 15-20 seconds at a time. The truck seems to drive fine other than the whining noise, the tranny appears to be shifting fine. The whine will usually end if I let up off the gas pedal. Today, I even put the truck in 4X4L and drove it around for a short time to see if the whine was present. I hardly heard it then, but it was there once or twice, though not nearly as bad as when it was in two wheel drive.
Any ideas on this one? Am I looking at needing to take out a second mortgage for repairs on the truck? Thanks in advance for any help..
Any ideas on this one? Am I looking at needing to take out a second mortgage for repairs on the truck? Thanks in advance for any help..
#2
#4
#5
Mine did the same thing .. would wine at start and go away .. then got worse .. would wine at start and while driving .. when i would hit about 3rd gear it would go away and it was fine until the truck would sit and get cold then it would happen allover again... my dad has been working with Fords for 22 years and is currently the service manager for a dealer... he told me to change the tranny fluid and filter .. i did this and it went right away... the magnet was full of clutch errosion as was the bottom pan.. cleaned them all up and i have not had any kind of wine .... hope it helps... also i have acess to the IDS sys. so if i can help anyone with anything let me know..
#7
Trending Topics
#8
Noise
My co-worker again, we changed his rear end alxe bearings. Took six hours and around $150 in parts, labor was free.
All that work and the noise did not go away.
He ended up changing pinion gears and noise went away. paid around $300 to fix
He owns a 2002 screw, mine is a 2001 screw.
All that work and the noise did not go away.
He ended up changing pinion gears and noise went away. paid around $300 to fix
He owns a 2002 screw, mine is a 2001 screw.
Last edited by jdmattsland; 03-28-2007 at 11:31 PM.
#9