Just Wanna Share
#1
Just Wanna Share
So this is my truck, i dont post on here very often so i just wanted to share some of the current progress i've been makin here
this is basically the start, chrome handles & badges
then some 2" shackles & another layer of tint.
painted the dash & installed touch-screen double din
right after i hooked everything up & tested it, very sloppy i know. first amp, JBL GTO 1201.1
15" RE SX powered by a US Amps Merlind MD1D after the JBL started to burn up. then i concealed it & bought some fans to keep cool in there (which i never put in)
then suede headliner & pillars
then a lil damage from the wreck
swapped to a 4wd lower valance
new fender on & repainted with new 1-piece headlights & chrome honeycomb grille w/o emblem
sold the rear bumper, better plans
started color matched suede inserts
this is basically the start, chrome handles & badges
then some 2" shackles & another layer of tint.
painted the dash & installed touch-screen double din
right after i hooked everything up & tested it, very sloppy i know. first amp, JBL GTO 1201.1
15" RE SX powered by a US Amps Merlind MD1D after the JBL started to burn up. then i concealed it & bought some fans to keep cool in there (which i never put in)
then suede headliner & pillars
then a lil damage from the wreck
swapped to a 4wd lower valance
new fender on & repainted with new 1-piece headlights & chrome honeycomb grille w/o emblem
sold the rear bumper, better plans
started color matched suede inserts
Last edited by fdimeroller; 06-08-2010 at 07:36 PM.
#2
weld-in rollpan as of yesterday!
more to come. tail light fillers go in today, and weld-in 48" LED brake/signal light. handle relocator kit should be in before the end of the week as well. not the best chop, but this is basically what it'll look like all done:
Last edited by fdimeroller; 06-08-2010 at 07:37 PM.
#5
and i was thinkin bout gettin a tonneau, but the bed caps really turn me away from it. theres a fiberglass one in my local craigslist for $75 but i dont wan't it. IF i ever get one it'll be one of the super low profile ones, but i think i'll have the bed caps ptm and call it done in the back
#6
#7
and i'm deff not sheetmetaling the top of the bed the bed floor and walls, now thats another story
and yep, keepin the factory paint scheme til i decide which shade of blue i want in the future....or maybe i'll never change cuz its so close to crimson & i'm from/for Bama...
Trending Topics
#11
not worried bout the handles, cuz they're gonna get shaved, & tailgate handle will be relocated this week.
#12
if you're going to get the xlt mirrors get these from ebay the right and the left are only $28 each with free shipping
EDIT: and for the bumper the top PTM to the body and the valance PTM to the lower part of the truck would look really clean, plus it'll be different from everybody else
EDIT 2: something like this
EDIT: and for the bumper the top PTM to the body and the valance PTM to the lower part of the truck would look really clean, plus it'll be different from everybody else
EDIT 2: something like this
Last edited by expedition4x4; 07-21-2009 at 11:20 PM.
#15
Looks great so far!
Some of my suggestions...
SS Mirrors
PTM Upper Bumper Pad & lower Valance
PTM Grill surround
When you shave the handles, shave the badges, antenna, and wiper nozzles...
Instead of relocating the tailgate handle, make it a electric pop... It is SUPER simple to do this modification and its 100% custom...
If you are interested, I could give you some more info and pictures because that is what I did to mine when I shaved my tailgate.
Some of my suggestions...
SS Mirrors
PTM Upper Bumper Pad & lower Valance
PTM Grill surround
When you shave the handles, shave the badges, antenna, and wiper nozzles...
Instead of relocating the tailgate handle, make it a electric pop... It is SUPER simple to do this modification and its 100% custom...
If you are interested, I could give you some more info and pictures because that is what I did to mine when I shaved my tailgate.