1999 F150 XL door panel removal
#1
1999 F150 XL door panel removal
New member here. I need some help on removing the door panels without breaking the clips. Has anyone done this on my model truck?
I have found for different models and I've looked in the books, but have not found anything specific for my make and model.
Any suggestions would be appreciated.
I have found for different models and I've looked in the books, but have not found anything specific for my make and model.
Any suggestions would be appreciated.
#2
karen,
to do this there are several things to do
1 snap off the triangle shaped plastic in the front of the door to do this simply pull with some pressure and it should come off
2 snap off the long piece of plastic on the outside of the door in the same manner as the triangle
3 there is a circle right under the door handle you need to remove(it can come off with a flathead screwdriver) and there is a screw inside that will let you take the handle off
4 on the window crank you kinda pinch the plastic and a layer slides to the side and there is a screw underneath that you take out and the handle comes off
5 after you have done all of this, you should be able to pull the entire panel up and it should come right off with no problem!!
any more questions or problems leave a message and i could hopefully help
good luck!
brent
to do this there are several things to do
1 snap off the triangle shaped plastic in the front of the door to do this simply pull with some pressure and it should come off
2 snap off the long piece of plastic on the outside of the door in the same manner as the triangle
3 there is a circle right under the door handle you need to remove(it can come off with a flathead screwdriver) and there is a screw inside that will let you take the handle off
4 on the window crank you kinda pinch the plastic and a layer slides to the side and there is a screw underneath that you take out and the handle comes off
5 after you have done all of this, you should be able to pull the entire panel up and it should come right off with no problem!!
any more questions or problems leave a message and i could hopefully help
good luck!
brent
#3