Just Came up with a sub box console idea and was wondering what y'all thought
#1
Just Came up with a sub box console idea and was wondering what y'all thought
Here it is! the circles are off because of the scaling! I will be using two sundown SA-10D2's on a kicker CX1200.1 what do y'all think? there will be cupholders as well as an indention where the amp will be and covered in plexi. any advice, ideas, criticism? Thanks!
Nic
Nic
#4
The circles on the front slanted edge are supposed to be the subs! I had it mocked up and checked the dimensions and it was like 16' by 10' so I had to scale it down in SketchUp and it distorted the circles a bit, as for the math I haven't done it yet, but I'm hoping for about a cube to a cube and a quarter per sub
#7
Trending Topics
#8
#10
Thanks man! gonna get working on and hopefully have it done in the next couple of weeks! Class and a new job just started up so this will be a weekend project at best, still gotta find a second seat as well as hopefully doing the expy bucket and console swap up front, but having a real struggle finding any in charcoal, especially a rear 40 in charcoal
#11
Not sure if it's possible with your design, but having the subs fire towards the back wall will sound a lot better from the front seats.
#12
I'll be doing a full Navi seat and console swap while I'm doing this, and charcoal seats are scarce in the Austin TX area
#13
I have the same console out of the navi in my truck. I have a 97 extended cab with the back seat taken out and a box with 4 12 inches subs.....the box i see that you are designing might work, but you cant be using anything bigger then an 8 inch sub.....if you use 2 10 inch subs your front board where the subs mount would need to be larger. i also think that this is way to small of an enclosure if you are going with 10 inch subs and up....as for cup holders....good luck with that...the bass from that box will shake the hell out of whatever is on it