Pre-1997 Models

help with 86

Thread Tools
 
Search this Thread
 
  #1  
Old 06-11-2014, 07:46 PM
jshad101's Avatar
Junior Member
Thread Starter
Join Date: Jun 2014
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
help with 86

Hi. I recently bought an 86 f150 with the 4.9 v6. The guy I bought it from changed the manual fuel pump right before I got it. The truck ran fine the first day, then started to act up. The truck is running very rough and smells rich. It acts like its missing so I replaced the plugs, wires, cap and rotor. Still runs bad.

Ive changed the oil and there was some fuel in it from the fuel pump going bad. The auto choke is fully open after a few minutes of running and the pcv valve has plenty of suction. So, they both seem to be operating correctly. Im not sure what else to check so any help would be great.
 
  #2  
Old 06-12-2014, 02:27 AM
jgger's Avatar
Senior Member
Join Date: Oct 2009
Location: Corona, Crazyfornia
Posts: 2,581
Received 6 Likes on 6 Posts
You meant inline 6 right?

Is this a carbureted motor? If so you could have a saturated float or a needle that isn't seating.
 




All times are GMT -4. The time now is 10:59 PM.