3 more cab related ?s
#1
3 more cab related ?s
1 on the pedal assembly do i have to pull the black rubber tabs to pull off. How do they come off i cant pull the assembly off without bending
2 on the shifter i loosed the nut holding it on and hit but doesnt come off. What do i do there
3 on the seatbelts where they go into the floor in the corners how do i take those off.
Thanks guys
2 on the shifter i loosed the nut holding it on and hit but doesnt come off. What do i do there
3 on the seatbelts where they go into the floor in the corners how do i take those off.
Thanks guys
#2
If the shifter is for the M5od, install the nut on the opposite side and it will pull the pin out.
The seat belt bolts are Torx or Allen heads and you'll need the right size. The nut IIRC is welded on the underside so you can take it out from inside the cab. Needless to say they can be stubborn to remove from older trucks that have spent any time in the rust belt.
YMMV
rikard
The seat belt bolts are Torx or Allen heads and you'll need the right size. The nut IIRC is welded on the underside so you can take it out from inside the cab. Needless to say they can be stubborn to remove from older trucks that have spent any time in the rust belt.
YMMV
rikard
Last edited by rikard; 01-30-2012 at 01:09 AM.
#4
#6
#7
Trending Topics
#10