92 hard shifts, code 122 (TPS voltage low)
#1
92 hard shifts, code 122 (TPS voltage low)
A few problems showed up at once on my 92 5.0 w/ E4OD tranny. First idle was stuck high around 2000, it was shifting hard, stalling. Took it to mechanic, he replaced MAF sensor. He said test drive was fine. Next day idle was at normal speed but it continued to stall and it was shifting hard and early. Threw a code 122,so I replaced Throttle Position Sensor and cleaned the connector pins. Also cleaned throttle body and replaced gasket. I checked all vacuum lines, no leaks. Checked all fuses, all lights working. This cleared up the stalling, but the idle is lower than usual, especially when cold.
Still getting hard shifts, check engine light and code 122. Any ideas?
Still getting hard shifts, check engine light and code 122. Any ideas?
#4
#6
#7
Join Date: Nov 2006
Location: Memphis, TN 38135, USA, Earth
Posts: 5,495
Likes: 0
Received 7 Likes
on
7 Posts
Trending Topics
#8