Pre-1997 Models

1992 F150 6 cyl. potential problems ??

Thread Tools
 
Search this Thread
 
  #1  
Old 12-02-2008, 06:36 PM
aquaholic's Avatar
Junior Member
Thread Starter
Join Date: Dec 2008
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
1992 F150 6 cyl. potential problems ??

i'm buying a 92 F150 with a 6 cyl engine. i have never owned a ford before so i'm not sure what i need to be looking for on these trucks. anyone know of any well known problems with this particular vehicle? the owner has stated that the oil pressure guage occasionally goes to 0 while he's driving it. oil pump or guage?
 
  #2  
Old 12-02-2008, 10:36 PM
MI02SVT's Avatar
Senior Member
Join Date: Nov 2008
Location: michigan
Posts: 314
Likes: 0
Received 0 Likes on 0 Posts
i had a 89 f-150 with the 300 i6 its a great engine will last forever if you take care of it i wrapped my truck around a fire hydrant and it still ran with the radiator up into the pulleys for the oil pressure i had the same problem it was always low never at 0 but low i just put lucas in it and it was fine id go with the oil pump and if you want to upgrade that get a high volume not high pressure pump other than that its a great truck
 
  #3  
Old 12-02-2008, 10:39 PM
MI02SVT's Avatar
Senior Member
Join Date: Nov 2008
Location: michigan
Posts: 314
Likes: 0
Received 0 Likes on 0 Posts
on second thought could be the oil press sendin unit maybe the wire isnt hooked up tight enough check that or get an aftermarket oil pressure guage a mechanical one and hook it up that will tell you exactly how many psi you have at all times
 



Quick Reply: 1992 F150 6 cyl. potential problems ??



All times are GMT -4. The time now is 12:18 PM.