Well my truck is going into the shop very soon to have some custom 12inch leaf springs installed and the rear end be re done. I am running 6inch leaf springs(i believe or 4) i will get clarification on that. But also with an 8inch block who i doubt anyone will buy haha. But also ill be getting custom driveshafts made front and rear for the truck. Just selling these parts because i wont need them anymore obviously. I will let you know when they are off the truck and cleaned up. The truck itself only has 57k on it and the rear springs probably has 40k on them. But just PM if your interested and ill get pictures asap


UPDATE:
Driveshaft ill still be using some of the parts for the truck still so it wont be a complete driveshaft but if you need the driveshaft itself and can re use your parts then it will work.

these picture are from when i installed my lift but in the picture are the leaf springs, blocks, driveshaft im selling.

 

also i will probably be selling a 2inch fabtech driveshaft spacer as well.

 

I have a 4" rancho. It only lifted my 4x4 like 2 inches over stock with the new 4" blocks. Would these leafs basically lift my truck the same amount as my blocks?

 

hey man if they are 4inch springs they will replace that block but you will need new u bolts and nuts i believe. But i will get clarification on whether they are 6inch or 4 inch.

 

only problem is im pretty sure they are 6inch springs. Also what the rancho give you to lift the rear end a 4inch block?

 

I Believe it was 4 5/8 or something like that.

 

ill let you know when i find out

 

I'm interested in the rear springs once you have them off and a price. Maybe the spacer also. I have a Fabtech coil over lift and would like to get rid of the block.

 

Hey man i got a qoute on everything last night on whats going to be getting done to it and hes going to measure the springs to find out for sure. I will let you know if they are 6inch springs then you are the first to get grabs on them. Spacer should still be in there but honestly with my 6inch lift all the way up too 8inches of suspension lift my driveshaft was still good so you may not need it.

 

Thanks, that would be great

 

bump

 

Were you able to get confirmation on the springs being 6inch or 4? Also, I would need them shipped to 83617.

 

Picture of the Drive Shaft. The Leaf springs need to be cleaned up but i do have them off and sitting in the storage unit. They also would need new pads for between the springs.


PM me

 

Also got the 8inch blocks as well. They will include the u bolts with them as well.

 

Still interested. Shoot me a price shipped. Thanks