Time for me to replace front wheel hub bearing!!!

Thread Tools
 
Search this Thread
 
  #1  
Old 09-03-2008, 02:12 AM
Dans4x4F150's Avatar
Senior Member
Thread Starter
Join Date: Dec 2006
Location: Warrensburg Missouri
Posts: 211
Likes: 0
Received 0 Likes on 0 Posts
Time for me to replace front wheel hub bearing!!!

Yup when i got the truck about 1.5 year ago i replaced the started replacing the bad ball joins so i did all 4 of them. Well when i went in for a alignment they showed me how bad my passenger side hub bearing was so they replaced for me and i just had to buy the part at there cost! no lebor they were friends of mine . Well now about year and a half later the driver front one has some play in it and it is squeaking! Anyone no of a cheep place to get one? The cheepest i have found on ebay is 90shipped. My truck is a 98 4x4 f150. Anywhere else? If anyone have the size of the axle bolt please let me know. Im going to do a write up for everyone else.
 
  #2  
Old 09-03-2008, 10:29 PM
fordmerc's Avatar
Member
Join Date: Mar 2007
Location: Hayden, CO
Posts: 84
Likes: 0
Received 0 Likes on 0 Posts
The nut on the cv at the hub is a 36mm, the smaller bolts at the front diff if you want to take the whole cv axle out are a 12 point, 12mm, same as the bolts that hold the drive shaft to the rear diff.
 
  #3  
Old 09-04-2008, 06:57 AM
firedognick's Avatar
Senior Member
Join Date: Jan 2007
Location: Marshville, NC
Posts: 130
Likes: 0
Received 0 Likes on 0 Posts
Hey man I know the feelin! I replace them often, I got all of mine at thepartsbin.com/ I payed 190 though, as aposed to 300? that AutoZone wanted. I called to place the order and got an extra 10bucks off. It ain't no 90 dollars IMO. Well now that I think of it I am not even sure if we have the same part I have an 03' 4x4? I have changed all of mine because I wasn't paying anyone and it was pretty easy.
 
  #4  
Old 09-04-2008, 12:58 PM
Klitch's Avatar
Senior Member
Join Date: Oct 2003
Location: Washington
Posts: 4,920
Likes: 0
Received 3 Likes on 3 Posts
90 something shipped is the lowest price ive seen.

im pretty sure its a 36mm nut on the cv like fordmerc said. althought i dont know why he's telling u about the 12pt bolts on the driveshaft.
 
  #5  
Old 09-04-2008, 10:13 PM
fordmerc's Avatar
Member
Join Date: Mar 2007
Location: Hayden, CO
Posts: 84
Likes: 0
Received 0 Likes on 0 Posts
I was just including that in case he wanted to take the cv axle completely out. Just saying the bolts at the front diff are the same as the rear driveshaft.
 
  #6  
Old 09-04-2008, 10:52 PM
rcfreak24's Avatar
Senior Member
Join Date: Aug 2007
Location: Omaha, Nebraska
Posts: 153
Likes: 0
Received 0 Likes on 0 Posts
I just replaced my whole hub assembly on the driver side front 2 days ago! i cant find my pictures but it was easy as heck! I payed 166 for the assembly.. Took about 30 minutes to do it for a first time. 3 bolts holding it on, 2 bolts for the brake caliper, 3 screws for the brake cover, and the 1 big nut on the cv shaft....
 
  #7  
Old 09-10-2008, 12:32 AM
Dans4x4F150's Avatar
Senior Member
Thread Starter
Join Date: Dec 2006
Location: Warrensburg Missouri
Posts: 211
Likes: 0
Received 0 Likes on 0 Posts
yeah i know it would be easy just need to no the cvc bolt size and thanx alot for the help! I found one at a 4x4 salvage shop for 65$ and its only 15 miles away
 
  #8  
Old 09-23-2008, 07:17 PM
Dans4x4F150's Avatar
Senior Member
Thread Starter
Join Date: Dec 2006
Location: Warrensburg Missouri
Posts: 211
Likes: 0
Received 0 Likes on 0 Posts
went and got the part today $65 used but life time replacement warranty going to try and throw it on tomorrow
 
  #9  
Old 09-24-2008, 03:23 PM
Dans4x4F150's Avatar
Senior Member
Thread Starter
Join Date: Dec 2006
Location: Warrensburg Missouri
Posts: 211
Likes: 0
Received 0 Likes on 0 Posts
here ya go https://www.f150online.com/forums/ot...t-how-too.html
 

Last edited by Dans4x4F150; 09-24-2008 at 03:41 PM.



Quick Reply: Time for me to replace front wheel hub bearing!!!



All times are GMT -4. The time now is 08:47 PM.