Showing Visitor Messages 1 to 10 of 56
-
2001 f150 4x4 5.4. Had an engine code for bank 2 running to lean. From this forum figured it was a vacuum leak. Replace a worn out hose, erased code and cel has not come back on. Light had been on for a little while with no significant running problems, but then it started running rough. It got better after replacing the hose, but still have a shutter between 1000 and 1500 rpms. again I have no cel so no codes to go after. Any suggestions on what to try next
-
I really appreciate the TOTM vote! It means a lot.
-
Good morning, How do I start a new thread?
-
2002 Ford F250 5.4L: worked fine Friday afternoon when I parked it. Saturday it wont turn over at all. when I turn the key to start, all lights go dim and I hear some clicking in the dash. I pulled the starter and had it tested along with the battery. Both tested good. Battery posts and connections are clean. I put my battery charger on to make sure i had enough juice to start it. It still does not start.
-
-
Hello.. I am new here, and i am having issues with my ford and was wondering how i post the question without replying to someone elses post.
-
Thanks for the sticker RP! Just got it in the mail today!!
-
morn- i'm curious to what happened to my msg to the transmission forum? ths, rt
-
Hi RP,
Did you end up going with red LED tail lights? I just picked up a 10 Blue Flame FX-4 and that chrome has to go! Thanks in advance for your help. Regards, Dave
-
What's up RP?
Long time. I read that you picked up a set of the 2013 HID's. Did you get a newer truck, or did you get a retrofitted set for the '05? If for an '09-13 series, how was the install? I've read conflicting info about harnesses, computer issues, blah, blah.
Thanks,
SL
