pdabbs911

nope...it got fubared in the wreck. i do have the factory metal bumpers front and rear

I think there are a few threads somewhere on how to post pictures and what not in a reply. Just use the search function.

Also, if you'd like, send me some good, clear pictures of your truck, and I will make you a signature, and tell you how to get it to show.

The backspacing of your oem wheels is 4.5 inches. I would not recommend a wheel spacer. They usually cause more problems than the solve. Your lift spindles probably push your front wheels out enough so the 35's won't rub the frame. Sorry I didn't notice that in your first message.

No problem. You don't have torsion bars on your 4x2. You have coilsprings. You can add a 2 inch Daystar coilspring spacer to level your truck. This along with the body lift and your lift spindles will allow you to fit 35x12.50's. They will rub the frame slightly at full steering lock if you use the oem wheels. I'd suggest an 8 inch wide wheel with 4.5 inches of backspacing.