The spindles are a great idea. You can combine them with coilspring spacers or lift coils, but you can't combine the lift coils and the lift springs. If you do, he will have to have new upper control arms to get the alignment within specs. I'd use the spindles with Daystar urethane spacers. I had a set on a Jeep for several years with no problems.

hey wandell i see you in alot of forums and you always have good smart advice so i wanted to ask you a question my buddy has a 03 screw 2wheel drive and he is wanting to do a front level i found a 3.5 spindle fabtech but its like $500 well one thing i was thinking about is maybe him getting some 2" lift coil springs and then maybe a 1" coil spacer he doesnt want polyurathan spacers but they are cheap and might be the way to go do you know if they hold up and plus do you think that putting those 2 together would be safe let me know thanks