mxr181

I got it off of ebay a long time ago but I think its doestch (spelling?). I think I got the spindles alone for less than $300 new. I would just look around online and try to find them as cheap as you can, I think they are normally like 400ish. Check out springtech on ebay I think they have spindles with blocks that are priced pretty good.

what brand is your spindle lift? i'm looking for one and i want one that isn't so high priced?

it was pretty dang close...I dont remember if it was perfect but it was a lot better than stock and with 265's it looked pretty good. I had the daystar polyurethane one first and didnt like it cause it like squeezed out and made the spring bow out, I got a set of metal ones that go in the bottom of the lower control arm and they have been perfect!

hey!
did your truck sit level with the 1.5 inch spacer?

Westcoast: my truck has a 3.5" spindle lift and 1.5" coil spacers and 3" blocks in the rear. Im running 285/75r17 (33.8"x11.6") nitto terra grapplers with fx4 takeoff wheels.

Alex: yes I ran the oem shocks until it had 113,000 miles and they were blown-out! I recently got bilstein 5100's and the truck rides great again

and were you able to keep your stock shocks with the spindles and 3 inch block?

What lift do you have? And size tires? I want to get a leveling kit, spindle lift and 3" blocks in the rear.

Thanks

awhile back there was a guy on eBay selling the spindles for $215 plus tax. I am not sure which brand they are but I havent had a single issue with them so as far as Im concerned I scored! I would just look around online and try to find them as cheap as you can, I think they are normally like 400ish. Check out springtech on ebay I think they have spindles with blocks that are priced pretty good. when I had 265's I was running a 2" block with a little "cali rake" but it didnt look right with the bigger tires so I went ahead and got 3" blocks and it sits maybe .5" higher in the front. Thanks for the compliment!

Thanks for commenting back!
about how much did the spindle lift cost you? did it just come with blocks for the rear?
i love your trucks stance with that lift and tires

So whered you get your billet grille from? Cuz I've been lookin for one all over...