BLUE20004X4

hey. saw your truck in teh random pics on the top of the page. what suspension are you running? also what tires do you have on the truck? your truck stance looks good.

Help me out Blue! I need some advice for snow driving. Check out my post in the tires section...
http://www.f150online.com/forums/whe...snow-help.html

Honestly, I got mine to that point also, but needed only to replace a parking brake switch so I didn't need any further. I think I got it as far as needing the cable off. I can't remember if the 3 bolts were it aside from the cable. Sorry I couldn't do more for ya, just unplug also the switch and find out how to undo the cable from the pedal.

Hi i was reading one of your posts about the E brake pedal you were helping another member out with a question. I have a 2000 expedition XLT 4x4 with rear disc. I have a set of q logic kick panels for my componet set. I need to heat up the e brake pedal and bend it over so it can clear the kickpanel. I tried unbolting the e brake assembly it was 3 10mm bolts holding it down. I got all the bolts off but i couldnt pull it out it i dont know if its hooked in or something or im missing somthing. The assembly was all loose and i could wiggle it around pretty good but it didnt wanna come out so i just stopped so i woudnt break anything. If you could let me know what im doing wrong i would appreciate it.

Thanks, CHong