JakeKo

Its drivers side best I remember right? I sold my truck a while back but on the drivers side I put a o2 bung in the rear of a high flow cat. Then welded the highflow directly on to the header. I used o2 extensions it worked. If u can't get those front o2's in it'll burn up ur motor. The rear ones, I never plugged them in since they just threw 2 codes a piece. Didn't bother me good luck with it def a pita

I decided against them... I would want the PTM mirrors and those are pretty expensive. So I'm gonna do some other stuff instead... I think I'm gonna get a rollbak or pace edwards bedcover with carpet lining soon. Thats next on my list.

What tire/wheel combo is that?

Simply put, I am jealous of your truck.

Wow I did NOT know that! Thanks for the heads up! lol Yeah I think dealers are charging like 600 bucks per mirror or something like that I'm not sure. And I had found those too. I was snooping around on ebay after I got your message. I'm pretty patient at this point theres no rush. So I'll keep looking for deals. Thanks for all your help bud.

Thanks man. Yeah I was thinkin about calling some salvage yards to see if they had any trashed f250s or anything. Trying to get lucky lol.

Hey bud. Sick ride! I'm starting to get the ball rolling on my F150 to look a lot like yours with a slightly different wheel/tire set up. But I was curious to where you got your tow mirrors at and for how much? Again man, Well done on your truck.

Yeah I used a dremmel with the cutting bit, then I sanded it off. Stay safe in Afghanland, I have a nephew in-law (I guess that's what I call him) stationed over there somewhere, and my neighbors son is going to be deployed over there before too long.


If you have any questions at all, just ask, I'll try to respond as soon as I can.

Yeah, keep in mind that I not only had to slot out the side brackets, but I also had to trim off an 1/8th to 3/16ths of an inch off the bottom of the opening on the surround as well, if you don't you will definitely have some jamming issues when opening the face plate.

Oh, and thank you for your service to our country, utmost respect for guys like you!

Hey Jake, thanks for the compliment. I don't have any issues with it jamming, but I did have to do some modification to the Metra kit to get it to sit flush. If you install it without the alteration, it sticks out about a 1/4 inch from the dash.