Rollin 06

Hey Bob. I bought my wheels a year ago but I'm pretty sure they stopped making them in a 22. That's most likely why you're unable to find them. I've got a 6" lift with coil overs and an AAL in the rear. It's around 8" total. Let me know if you need any other help or info. I'll do my best to help you out if I can.

They rubbed with the same rims with 35's? Damn! I don't know what I am going to do now. I may just go with the deep offset and stay with 35's. Thanks man

Sorry for taking so long to reply. I haven't been on in a while. I have 22x11 with -25 offset. I believe a -44 will stick out a lot more than mine. The +18 with 9.5" rim is not my favorite setup. They will tuck in to much IMO. You would almost need to try the -44 to make sure they won't rub when you turn. When I was running 35's on a 6" lift my tires rubbed a little when I turned on the rear part of the from fender flair.

11" of lift, 8" suspension, with 3" body lift and 38" toyo mud terrains.

I could easily fit 38's. When I turn my tires closest point to the fender is around 3". Yes, I have 22x11. I wanted a wheel that had a big lip and a negative offset. No problem with the questions.

I have stacked spacers up front with a 2.5" spacer. I don't use my truck as a daily driver or offroad it so didn't want to spend the money on coilovers at the time. I'll eventually take them off and replace the stock shocks with the Bilsteins. There are several guys on here with the coilovers who I'm sure can let you know how much to crank them.

Thanks.

Welcome to the site... Great looking truck... Very bold and strong... Keep coming back...

Thanks! They are 35x12.50x20 So far i love them!