nickbell

35/12.5/R17. Yea its the Performance Accessories 3" and a leveling kit. I have a AAD for it but I need bigger shocks to put it on.

[IMG][/IMG]

Ok, so I just need to look for some wider wheels? I'll look into them when I need new tires. What wheels do you have? I like those. Oh and thanks for all the help!

It's just a measurement. It's the distance from the mounting surface of the wheel (where it bolts to the hub) to it's rear edge.

Yes, it is recommended that you do.

Your going to need to lift the rear of the truck up along the frame and support it on jackstands. (Make sure you chock the front wheels!). Then you need to support the rear axle somehow that you can lower it down a little bit after you remove the u-bolts.

Yes.

I'm sure they would be a good pick. Toyo makes some nice tires. I like a more aggressive looking tire on my truck and that's why I picked the Mickey Thompson ATZ. Its also an all terrain, but it looks more aggressive. I like the Toyo Open Country M/T's also. I hear they wear really well and last a long time. I have a friend with them and he likes them very much.

The tires are still for sale they are Mickey Thompson ATZ they are 325/50R20 (or 33x13.50R20) if interested please call me at 217-549-0102

I saw the picture you referenced. The part with the handle looking piece is the block. I think the handle looking part of the block is for the bump stop. You should only have one block under your u-bolts. Some people do stack blocks which could be the case on your truck, but its not recommended.