XPerties

i see you from nj. where exactly you located?

I have 17x8 wheels with +18 offset with a 315-70-17=34.6" for mine and run about 12.5" wide and I did some minor trimming like where that black plastic piece is below your bumper I just cut it straight down, cant even tell, then cut about a 4"x4" piece on the back right where it bellys out a little bit but the tires hide it so you cant even see it. And after doing that I dont rub at all in forward in full lock either way and only rub in reverse at full lock when I turn to the left. In my mind I love the 35's on it and the trimming is not much at all.

What brand of plows do you install? I just put a Curtis 7.5 Steel on my '09 FX4 and you can't even angle the blade all the way without hitting the ground. I had the same blade on my '06 Chevy tahoe with not a problem. I guess I may need to trade in the steel blade for a poly or look at a Meyers if that would be better. I even put in the 2" riser blocks on the shock towers.

thanks!