JWolsiffer

i actually got the grille installed by a shop back in texas when i had my exhaust and line-x done. i wanna say it cost around $120 for the grille but i really can't tell you who its made by or where to find one. your best bet would be to try stylintrucks.com or something like that. good luck and let me know if i can help you out anymore.

its the cheapo tacky ole bolt over, i got it on ebay for like 90 bucks only cuz i thought it was the whole real grille, ive taken it off now because i grew out of it, anyways thanks man and good luck

Thanks for the compliments man!

As far as the combo goes...my tire size may surprise you a bit...

Tires are Mickey Thompson ATZ's 275-65-18's. Personally I wanted to go a fair amount larger, but some guy sold me these mickeys for $100 a tire new...normally their about $280 each, so i just couldnt pass that up. But once they were on, I've been pretty happy with how they look. I dont think they look too small at all.

The wheels are KMC XD Series Rockstars. There is only one option for offset and backspacing on the 18" Rockstar, so you cant get that wrong. You may have some trouble finding the Rockstars with the 5x135 bolt pattern tho. They are getting harder and harder to find since its an out dated pattern.

If you need to know anything else, just hollar.

Kruse

I'd go with the 305's

sorry man IDK it was on the truck when I bought it it is a replacement not a cover tho..

I was able to fit my truck into a 7' garage door, or carwashes even with the body lift and the 315's. I am originally from just west of Terre Haute across the IL state line in Casey. I do make it back there occasionally, was just there over Easter in fact.

I live in Indianapolis, IN. I don't know if those would fit. I am stock. No body lift. I still want this truck to fit in my garage...

Thanks, it was tough to let go of the old truck as it got a lot of compliments. Where are you locatedat? I still have the Mickey Thompson's I took off with about 20,000 miles on them when I traded. They don't fit very well on my new 20" rims...

Try this for a link to my gallery at my old site;
http://fordtruckworld.tenmagazines.c...ry.asp?id=1881

I did trade in my 2003 SCrew. I ran 315/70R17 BFG's on my truck with with a 3" body lift and then swapped them out after 60,000+ miles for a set of Mickey Thompson MTZ's which were the same size. The key to this setup was running them on my stock rims. I also cranked the torsion bars enough to level out the truck. There was slight rubbing at full lock, but it didn't hurt the truck or tires as it rubbed on the frame.

I have a ton of pictures over at my old stomping grounds @ http://fordtruckworld.tenmagazines.c...ry.asp?id=1881

no I have not. I am trying to figure out how to ship them!