07BlkScrew

Yes, a lot of people are running 305/55-20's using the oem wheels.

Appreciate the props!

Post up or shoot me some pics when you get it done

ooo ok, I got it.

Yes, I had it done over the factory tint in the rear/back window and then he matched the front up to match the back

If I remember correctly, it's like 15-20%(light coming in).

What did you mean by "touch the crew cab at all"???

Hi Scott,

I haven't had any problems with them at all. I live in Memphis, TN so we don't get as much snow as some other parts of the nation. When we do get snow, we dont lay out very much salt or sand like up north, so there not as much abrasive treatment on the roads down here. I clean them pretty regularly, every week or every other week when it gets cold outside and use a nice polish about once a month. I take mine off-road when I hunt, so they see mud and sand and crud like that, but nothing hardcore. i think that you will be ok.

Pat

Hey man, they are actually Mazzi Hulks. They look identical to the Eagle 064's. I don't have atz tires, but i love the way the look especially on the bigger sizes like 38's. I think the eagles cost less than Mazzi's too, so nice pull on your part.

The fronts are struts (coil overs), and they can only be mounted one way. You'll know what I mean when you see them.

To be honest with you, i not sure. Your best bet is to go to your local tire shop and see if they will mount one to see. Then you will really know.

4.5"

Hey 07, I just saw the quest you left me. i'm not informed enough with aftermarket 20x10's on 2.5 leveling kit. I've been trying to smoke out similar issues with backspace on 20's and 6" lift. good luck, as you'll see a lot of conflicting info on here and a few guys throwing hearsay around (with the best of intentions though). you just got to figure out who the knowledgeable ones are - like Wandell, etal

Doc - Have a quesiton for you. Going with a 2.5"leveling kit in fron and 1" in rear. I have the stock 20"s, I really want to go with a 20x10 rim with 4.626BS but so meny people are telling me I will have HUGH rubbing issues even though I'm only running a 33/12.5 tire. I can't see why I would have problems...

There is a member on here who I have talked with meny times via e-mail he has the exact same truck as me 2007 FX4 supercrew with 20x10's 5.4BS.

What are your thoughts?