Tylus

no

by contributer, I mean to be active in the forums. Supporter would be the $$$ part

I assume it cost $ to be a contributer. Correct?

Not bad then man, you got them so maybe so far it happened for the better... sweet new stang!

they seriously need to remove head from butt and re-evaluate...yes

They actually found my website today. I had been looking at buying a 2009 Bullitt for a few weeks. They met all of my requirements...provided I removed the site.

It's funny though. Everything I posted was 100% true. I could prove everything I posted on there. So Honolulu Ford couldn't touch me. That is why they gave me such a smoking deal on the Bullitt.

I visited your complaint site. That dealership sounds like one that should not be in business.

go to the advanced search

search for Recon and my username "tylus"


should pull up a thread I made about 6-7 months ago. It shows the install, and the wiring I did.



but yeah, I tapped the power off the headlight switch. there is a switched power supply to the running lights, and I used that for the LED's

When you added your cab lights, how did you wire them in? Aux switch or into the headlights?

the cab lights I used are Recon Smoked for a 2003-2008 Dodge Ram.

Surprisingly, the supplied install directions almost exactly match the F-150 cab. There is only about 1/2" of cab measurement difference.


After that, it was just a matter of placing the lights how I best liked their arrangments.

I was wondering where you found a template to put your cab lights on or how you did it for sure. Let me know any info you have for me about this if you would please and thanks for your time.
Marcus

there is a gap between the a/c ducting and the roush pod where they meet inside the dash

just ran some wiring through there where I need it. I think the center vent required cutting a tiny slot, but that was it