07BlkScrew

I can't see the install being that much money. If you want a price call Louis at (519) 621-5875. Tell him you want shocks and struts done, including front strut assembly like the one's I had him install. Just make sure he knows he'll have to do the strut/spring assembly. Tell him Rick referred you. See what he says. He's going to Mexico next week so you'd need to talk to him soon.

My backspacing is 5.71", pretty close to stock. I have absolutely no problems rubbing but it would be hard to say with those wheels. If you want a more educated opinion send a message to wandell. He knows his stuff and helped me with my questions about fitting.

I am not sure if the 20x10 would have rubbed, but I believe they would have. As did several others on here and they recommended the 20x9 over the 20x10. Definitely play it safe--much easier than having to go through the hassle of trying them on, having them not fit properly, and then sending them back. Your backspacing is going to be tough to deal with since your wheel is going to stick out so far.

hey, mine are an 18x9 with 5'' BS and mine rub on the inner fender in reverse. a 20x10 w 4.6 bs would stick out about 1 1/2'' further, and I believe it would rub like crazy, the 20x8.5 would most likely be a better choice IMO

Yeah the tires stick out about an inch or so. I'm the same as you..don't like them out too far. I think it looks perfect.

yeah it should keep you perfectly level...if you measure your truck right now on level ground to the highest points on the wheel well openings, that will tell you how far outta whack it is...mine was about 2.5'' raked...I put the 2.5 up front and it gave me 3'' of lift, making me about 1/2'' bulldogged, so I put in the AAL which gave me a bout an inch of lift making the rear about 1/2 inch higher than the front, which is perfect...yours will most likely be the same except for the block will give you about 1 1/2'' of lift in the rear, but an 07 has less rake than an 04, so it should work perfectly for you. I dont mind helping at all, I love f150's and the more people I can help make them look better, the better I feel haha. let me know if you have any more questions or if I lost you.

yes removing the block and getting the 3'' is the best way to go, I wish I would have done that...autospring is the company that I know of that makes them, they send new U bolts and everything...thats where I got my AAL and my leveling kit...their site is www.autospringcorp.com .... heres a link to the 3'' block http://www.autospringcorp.com/products/f150rearkit.htm , they have auctions on ebay as well, pretty fair priced

Yeah 33x12.5R20. They do not even come close to rubbing!

Here ya go, Saleen 30mm 23's all the way around.
http://s417.photobucket.com/albums/p...0Ford%20F-150/

Yeah, F150man has 30mm on all four wheels, you can see pics in his gallery.