I'll pack it up and take it to the post office and find out. I'll let you know.

Thanks for the reply back. Off the suspension topic here for a second. I'm looking to upgrade my head unit also someday soon, and for now i might be interested in your stuff that you have for sale. How much do you want for the Audiophile Sub, and the iPod interface shipped to me in Canada, shipped via USPS to Barrie Ontario L4N8H5 (about an hour north of Toronto). I have paypal also. Thanks Al

No, they haven't settled at all.

Red has your front end settled height wise any lower from when you first installed your Belltech's? Some guys are saying that it will settle some, even up to a 1/2" settle.

Actually I never did get an alignment. I kept changing the height an was planning on getting one after I finally settled on where I wanted it, and well I just forgot.

Thats my only fear is 3 and 3/4 gap going to still be cambered out. After my alignment my camber is adjusted at the max, i was told be the alignment shop. And it is cambered out still. So Red did you get an alignment, and did it correct it? Al

Mine is cambered out a little on the bottom, it was a lot worse when I had no spacers in.

Did you need to get a front end alignment? And are front your tires nice and straight up and down and not cambered out at the bottom? I would like a 3 and 3/4" gap, i just don't want to have my tires cambering out at the bottom. I hope i will be able to achieve that. 2 large spacers would only drop mine from 5 1/4" down to 4 1/4" . Thats why i'm thinking replace 1 full spacer with a half one, and aim for 3 3/4" gap.

Yeah, that sounds like a good guess. Is 3 and 3/4 the height you want or do you want it where mine is? If you want the same as mine, try two full spacers.

Mine came with 3 full spacers, so I couldn't fine tune as much as you can.

You went with two full spacers and now have a 4 1/4" gap from top of tire to wheel well lip, right? What if i were to go with a 1/2 spacer and a full spacer for a 1 1/2" total, what would the gap between the tire to wheel well lip be you think? 3 3/4" ?