Using stock headunit in 09

[cdiddy4224]

I recently bought a 09 F150 and want to use the stock headunit so i dont lose the sync and bluetooth features. I plan on hooking up 2 amps(ALpine PDX-4.150 for the comp and i have a Pioneer class D amp for the sub), running components(Alpine SPX-17PRO) in the front and back and one 10" sub(Kicker 07CVT10-4). What would you recommend that i use to integrate the amps into the stock unit? I was looking at Alpine's PXE-H650, but dont know if thats overkill or not. I havent heard to many great things about the JL audio Clean Sweep. I want clean sound even though im keeping the stock headunit, i would hate to install all this and have a muddy sound that doesnt reflect the eqiupment i installed into the truck

Register today or sign-in to remove these ads!

[Low_e_Red]

Either the Cleansweep, RF 3Sixty or the Audison BITONE. These all will work fairly easily.

[cdiddy4224]

which one would you recommend? ANy experience with them?

[Low_e_Red]

The Bitone is brand new from Audison. Supposed to be the End-all be all right now.

Second, would be the RF. I have one in my vehicle and am about to add a second (refer to the thread 00 Conti Build as to why....) But it will Re-EQ everything and takes about 20min to fully setup. Its operated via BT from either a laptop or a Palm.

Third is the JL. Its overrated and not as easy to use as either of the others. But still a topnotch product.

[cdiddy4224]

The Bitone is pretty damn expensive, dont see any online retailers for it also...the RF 3sixty.2 looks like its more within my budget