is the avic d3 hard to install?

[zsienkiewicz149]

is it hard to install the avic d3 on an 06 f150. by the way how does the dash come off? do you just pull it from around the vents like in the older model? any help would be appreciated or any link to a web site that shows step by step instructions. i know i found one for my 06 mustang when i installed my ipod to the shaker 500 system... thanks again

Register today or sign-in to remove these ads!

[attworth]

Originally Posted by zsienkiewicz149

is it hard to install the avic d3 on an 06 f150. by the way how does the dash come off? do you just pull it from around the vents like in the older model? any help would be appreciated or any link to a web site that shows step by step instructions. i know i found one for my 06 mustang when i installed my ipod to the shaker 500 system...

thanks again

The radio area comes apart very easily. Just stick a flat head screw driver in between the top and the dash and pry carefully. There's like 6 clips running down the side to pop it off

[Low_e_Red]

How much have you installed? BTW the VSS wire is pin 14 (grey/black) in the harness.

[pa_wolf62]

Originally Posted by Low_e_Red

How much have you installed? BTW the VSS wire is pin 14 (grey/black) in the harness.

Pardon my ignorance, but what is the "VSS wire"?

[Low_e_Red]

Originally Posted by pa_wolf62

Pardon my ignorance, but what is the "VSS wire"?

Vehicle Speed Sense. Wire that tells the truck how fast it is going.