Swapping OEM units

dizzydean · #1 05-25-2006, 11:53 PM

Hello all

I realize this must be one of the more common questions asked but it has been a while since I checked into this. I have an 05 Lariat model which I am going to swap the single cd player for the 6 player. What is the safest way to get the face plate off without any damage so I can do this. I tried pulling a bit but looks like the A/C controls start coming up also. No bolts or screws are visible

Any help is greatly appreciated.

Register today or sign-in to remove these ads!

casualtr · #2 05-26-2006, 02:42 AM

there shouldn't be any bolts or screws, it's held in with clips, I recommend gently pull on trim piece and take it one clip at a time.

just*rollin · #3 05-26-2006, 04:01 AM

all you have to do is open the ashtray, and grab a hold of the center section and pull. don't be scared to pull, the top ones are a bit tricky, just remember they come straight out. don't force it up. good luck.

dizzydean · #4 05-26-2006, 08:51 AM

Thanks for the tips. I will give it a try after work tonight.Gotta say this truck beats the heck out of the dakota I traded in