What did you do to your Harley truck today?
#1
What did you do to your Harley truck today?
Installed Illuminated Doors Sills
This mod was simple and straight forward.
No pulling door panels. No drilling holes etc.
Short version:
Pulled up the OEM bottom door sill.
Ran the two wires (into rectangle hole) where stock sills were.
Connect the two wires to the dome lights (passenger kick panel)
Attach the illuminated door sill where you removed the OEM one.
Open door. Door sill lights are on with dome light.
Close door. Lights go off.
Night pic - Both Doors
Garage pic - Both Doors
This mod was simple and straight forward.
No pulling door panels. No drilling holes etc.
Short version:
Pulled up the OEM bottom door sill.
Ran the two wires (into rectangle hole) where stock sills were.
Connect the two wires to the dome lights (passenger kick panel)
Attach the illuminated door sill where you removed the OEM one.
Open door. Door sill lights are on with dome light.
Close door. Lights go off.
Night pic - Both Doors
Garage pic - Both Doors
#2
Installed Illuminated Doors Sills
This mod was simple and straight forward.
No pulling door panels. No drilling holes etc.
Short version:
Pulled up the OEM bottom door sill.
Ran the two wires (into rectangle hole) where stock sills were.
Connect the two wires to the dome lights (passenger kick panel)
Attach the illuminated door sill where you removed the OEM one.
Open door. Door sill lights are on with dome light.
Close door. Lights go off.
Night pic - Both Doors
Garage pic - Both Doors
This mod was simple and straight forward.
No pulling door panels. No drilling holes etc.
Short version:
Pulled up the OEM bottom door sill.
Ran the two wires (into rectangle hole) where stock sills were.
Connect the two wires to the dome lights (passenger kick panel)
Attach the illuminated door sill where you removed the OEM one.
Open door. Door sill lights are on with dome light.
Close door. Lights go off.
Night pic - Both Doors
Garage pic - Both Doors
#3
#4
#7