Tips

[IDNC76]

quick question

i know nothing about exhaust

but i do have one of the magnaflow kits, with 2.25 oulet piping, and i was looking at new tips, but the ones i want are a 2.5 inlet

can it be done?

and also, im having the hardest time finding one of those in a 4in outlet
i basically want a tip that is 2.25 inlet, 8-12'' length, and either 3.5/ 4in Outlet


http://www.autobarn.net/ractive-roun...t-cut-tip.html

[bluejay432000]

Shoud not be a problem. Think my pipes are 2 1/2 and the tips are 3".

[screw_firstdate]

Check your local muffler shops...

[f150fella08]

yea most exhaust shops will carry 4" tips, 4" is the new standard of tip if you will, most people have 4" over anything else now, kinda like rims 20's are small now adays and 24" are the usual lol, but yea my truck is leveled out so the back sits lower to the ground so i just went with 3.5" and bluejay's truck sits low too so 3" is a good fit there

[DarrenWS6]

The shop will take care of mounting any size tip for you. You can search for specific size exhaust tips on Summit.

http://store.summitracing.com/egnsea...KeywordSearch\

[IDNC76]

thanks guys and thanks for the link Darren

summit has everything

now the question is do i want 3.5 or 4in oultet?

i want the 45 slash tips, and dual exhaust setup behind the rear tires

[DarrenWS6]

Originally Posted by IDNC76

thanks guys and thanks for the link Darren

summit has everything

now the question is do i want 3.5 or 4in oultet?

i want the 45 slash tips, and dual exhaust setup behind the rear tires

I would say 3.5" 4" 45'd slash cuts look enormous imo, 3.5" looks and sounds just right.

[IDNC76]

3.5 it is, i remember i was at the shop a few weeks ago, looking at their display tips, and the 3.5 fit inside the 4'' slash tip

thanks

[IDNC76]

last question:

this is pretty much the exact setup i want,

but i cant tell the size of those tips, i would say 4'' rolled edge 30 degrees?







Thanks Nooq

[f150 rider]

here is a few pic`s of the tips on my truck, they are 3.5"X18" long stainless steel



one more

[f150fella08]

x2 f150 rider, thats how i did mine too! exactly like that

[IDNC76]

anyone guess what size/ brand Nooq's Tips are??

[DarrenWS6]

Originally Posted by IDNC76

last question:

this is pretty much the exact setup i want,

but i cant tell the size of those tips, i would say 4'' rolled edge 30 degrees?







Thanks Nooq

Definitely are 4"ers. They look a tad bigger than my 4" round rollies.

[f150fella08]

yea those are oval anyways, im not much on oval

[DarrenWS6]

Originally Posted by f150fella08

yea those are oval anyways, im not much on oval

same here, & same for double walled, not too crazy for those either.