flowmaster exahust kit install
#1
#3
x2 that, any penetration spray such as PB Blast for the nuts and bolts, and into the rubber hangers. I have a can of spray lubricant I use for hangers also made by PB, it dries after a minute so it loses its sleekness and I like that so a hanger doesn't slip out of the rubber piece after installation.
Also remember to have everything tightened down loosely until the entire system is in and aligned up. It's a pain to go back under to loosen a clamp to make an adjustment. Just tighten down once.
Perhaps use some nickle anti-seize in certain spots incase you see yourself removing it in the future.
Also remember to have everything tightened down loosely until the entire system is in and aligned up. It's a pain to go back under to loosen a clamp to make an adjustment. Just tighten down once.
Perhaps use some nickle anti-seize in certain spots incase you see yourself removing it in the future.